Rainwater Filter
Rainwater filtration system for usage in WC and car wash
- Innovative design and superior construction technique
- Withstand working pressure up to 700 kPa
- Special filter media with enhanced absorption capabilities
- Able to filter fine particles as small as 10 microns
- Seamless fiberglass wound to withstand excessive and fluctuating pressure.
- Vessel does corrode, rust or leave any unsightly stain
- Available in manual and auto back wash.
AcquaSaver® Water Diversion Valve (code : ATA04)
AcquaSaver® is an automatic hydraulically operated mains to rainwater changeover valve. Ideal for rainwater harvesting which switches from mains to tank whenever tank water is available and automatically defaults to mains in the event of a power or pump failure.
- Full flow 1" outlets
- Solid Brass - Weather proof - Built to last.
- No regular maintenance
- No electrical components
- No standby electrical consumption.
- Suitable for any surface and submersible pressure pump.
- Can be mounted in any position and any distance from the pump.
- Can be mounted directly onto the pump.
- Certified dual check valve for backflow prevention.
Flap Valve
Hi-Flow Flap Valve allow a rapid flow of water through a double sealed, self cleaning valve that cannot be over rotated and left open. Vented Flap Valves with 0.955mm stainless steel screen allow a flow of air over the surface of the water which improves water quality and prevents a vacuum forming when large quantities of water are quickly drawn from the tank.
- Automatically opens & shuts
- Prevents pests from entering the tank via the overflow
- Higher overflow flow rate for high rainfall events.
- Self cleaning
- Available size for Hi-Flow Flap Valve: 100mm (Ø) (code: ATA07) and 150 mm (Ø) (code: ATA08)
- Available size for Vented Flap Valve: 100mm (Ø) (code: ATA09) and 300mm (Ø) (code: ATA010)
Header Tank (code : ART09)
Made from HDPE to store the rainwater to feed toilet, laundry use and other rainwater tap with gravity flow.
- Prolong the lifespan of pump.
Leveller Valve
- High performance cost effective Reservoir/ Tank valve
- Available inlet sizes : 15mm (1/2”) (code: ATA011), 20mm (3/4”) (code: ATA012) and 50mm (2") (code: ATA013)
Sign and Label (code : ATA014)
- Size: 5” X 3”
- Material: High impact board with UV print.
Filter Pit (code : ALF03)
Filter Pits handle large volumes of rainwater and enable screening to be done at a central point in the system. Extremely beneficial when used in conjunction with underground tanks or where tanks are placed downhill from the building.
- Convenient location for cleaning.
- Suits a variety of outlets to the tank – pipes can be 75mm up to 150mm diameter and can be in multiples to take the flow.
- Compact and easy to maintain.
- Optional junk basket for larger debris removal which incorporates a 6mm aperture stainless steel screen.
- Optional height extensions are available to increase the height of the top of the filter pit to ground level.
Optimax-Filter® External - Pedestrian Loading (code : ALF05) Optimax-Filter® External - Vehicle Loading (code : ALF06)
An excellent underground filter for both residential and small to medium sized commercial rainwater harvesting installations. The Optimax-Filter® provides a highly efficient, low maintenance, self-cleaning solution.
- External filter to clean the rainwater before the tank.
- Provides over 95 % water yield.
- Continuously variable installation depth of 580 mm - 1,050 mm (22.8 - 41.3") using the telescopic dome shaft.
- Minimal height offset (200 mm) between the inlet and outlet.
- Maximum roof surface area of 85 sqm with connections DN 100mm and 240 sqm with DN 150mm.
- Very smooth surface and therefore max. self-cleaning.
- Optional with cleaning unit external.
- Available with vehicle-loading cast iron lid.
Underground First Flush Diverter (code : AFF02)
The In-Ground First Flush Water Diverter takes the first flow of rainwater which may contain contaminants from the roof and gutters, seals it off, then automatically diverts the flow to the tank.
- Reduce tank maintenance.
- Prevents sediment, bird droppings, spiders, insects, mosquito eggs and micro pollutants from entering the rainwater tank.
- Improves water quality by reducing pollutants.
- Essential to protect pumps and internal appliances..
- Low maintenance requirements.
- Empties itself of contaminated water resets automatically.
HDPE Underground Tank
Made in high quality material- HDPE to store rainwater.
- Economical.
- Lightweight but strong, sturdy and durable.
- Chemical resistant & corrosion proof.
- Impact resistant with strong structural design.
- Food grade polyethylene construction.
- UV stabilized material.
- Durable and rigid design using interlocking baffles on the tank body.
- Capacity: 1200 litres (code: ART06), 2000 litres (code: ART07) and 3000 litres (code: ART08)
- Dimension : 1200 litres – 1300mm (H) x 1330mm (Ø)
2000 litres – 1450mm (H) x 1760mm (Ø)
3000 litres – 1625mm (H) x 1740mm (Ø).
DAB Divertron X-1000 Automatic Submersible Pump (code : ASP01)
This submersible pressure pump with build-in intergared electronics, designed to automatically start and stop the pump.
- Built-in electronic pressure switch and flow sensor.
- Quipped with dry-run protection and built-in non returned valve.
- High reliability.
- Available with screen filter as floating suction kit.
- HP: 900W, Max H : 36m, Max Q: 95¬/min, outlet connection : 1” , weight: 40kg
- Size: 150mm (L) x 450mm (H) x 150mm (Ø)
Stainless Steel Floating Filter
1" and 2" Stainless Steel Floating Filter with coarse screen.
- Intake of clean water just below the water surface.
- Prevent suction of sediment and foreign matter at the base of tank.
- Flexible and effective drawing of water.
Available inlet sizes: 25mm (1") (code: ATA015), 50mm (2") (code: ATA016)
Steady Flow Inlet
The small dirt particles can settle on the base of the tank, the filtered water is fed to the base of the tank through a steady flow inlet.
Available size:
- 100mm (Ø) (code: ATA017)
- 150 mm (Ø) (code: ATA018)
- 200 mm (Ø) (code: ATA019)
- 300 mm (Ø) (code: ATA020)
